Thermal Evaporators

Environmental experts agree… Wastewater Evaporators offer a simple and effective long-term approach to wastewater disposal cost reduction. Their design provides consistent operation, minimal clean-out, high efficiency, and low maintenance.

Wastewater is fed to the evaporator tank. A blower draws air stream into tank to remove vapors and combustion air into burner. The heat exchanger causes water to boil. Moisture-saturated air leaves tank through coalescing mist eliminator where oil/water droplets are removed and clean steam passes into the manifold. Flue gas joins water vapor at the blower manifold entrance – not exhausted into tank. Environmentally approved air streams are mixed in blower and exhausted through stack. When boiling is interrupted, the oils – freed from emulsion – float to surface and are decanted either automatically, or manually. Solids settle to tank’s sloping trough floor and are removed with concentrated liquid through the clean-out port.

Ask Met-Chem about Thermal Evaporators

Thermal Evaporators
Thermal Evaporator

Benefits of Evaporators

  • Disposes of water as it separates wastes – in one simple step
  • Eliminates sewer discharge accountability – forever
  • Handles multiple wastes and varying chemistries – simultaneously.
  • Allows fully automatic operation 24/7
  • Low-cost operation as little as $0.05 – 0.10/gallon

SERIES

400

500

600

650

700

800/850

EVAPORATION RATE (gph)
8
15
33
48
63
126
24 HOUR EVAPORATION (gal.)
192
360
792
1,320
1,512
3,024
FOOTPRINT
65” x 23”
86” x 23”
85” x 43”
90” x 43”
98” x 43”
128” x 58”
TANK CAPACITY (gal.)
118
174
333
312
296
517
HEAT SOURCES Natural Gas, Liquid Propane, Steam, Electricity
CONSTRUCTION 316 Stainless, High Nickel Alloys, Chloride Resistant Alloys

Speak with a Qualified Professional about Evaporation

Translate