Met-Chem provides repairs, upgrades, and inspections checks for Wastewater Treatment Equipment. We ensure that your dewatering equipment works properly for your Wastewater Treatment Application. Ask us about servicing Filter Presses, Clarifiers, Evaporators, Sludge Dryers, and much more.
Met-Chem can service your equipment on-site, or you can ship your equipment to our facility for repairs. We also offer Rental and Loaner Equipment so you can avoid a costly shutdown. Contact Met-Chem to discuss the problems you have with your wastewater treatment system. We will offer you various solutions to choose from.
Along with refurbishing our large inventory of Used Filter Presses and Used Clarifiers, Met-Chem is able to recondition a customer’s filter press or clarifier, regardless of the brand. Below is a list of the steps involved:
The customer will send us photos of their equipment. From the photos we will provide a quote with the work that needs to be done. This will be broken down into two sections, work that we know will need to be done and potential work that we cannot confirm until we test the unit.
The customer will send us their wastewater treatment equipment. We will do a no charge, full inspection on the unit and provide a firm quote for the work that is needed.
Once the customer agrees and places the order, we will begin work on reconditioning the filter press or clarifier.
When completed photos will be sent to the customer to show the quality work that has been done. We also welcome the customer to come and visit to inspect the filter press or clarifier.
If you are interested in having Met-Chem recondition your wastewater treatment equipment, please contact our sales department.
After
Before
After
Before
Met-Chem stocks most replacement filter press parts for quick turnaround time. We handle replacement parts for a variety of filter press manufacturers including JWI, US Filter, Siemens, Perrin, Watermark, Sperry, and Shriver just to name a few. Contact our sales department for more information.
The start-up and installation options are available with all Met-Chem waste treatment equipment. We can provide full support as you get your system up and running. We have installation technicians and technical representatives that we can send to your facility to make sure the system is running as it should, based on the engineering and design.
All units and systems are complete with manuals and telephone support. However, if you need someone to come to your facility, we will be happy to quote you on that as well.
Met-Chem offers a Filter Press Rental program. This program is designed to fulfill an immediate dewatering need, or a filter press to conduct Pilot Testing.
We often provide filter press rentals when customers are
A Filter Press Rental allows you to test your dewatering process, before you purchase costly equipment. By testing your wastewater process you can more accurately scale and measure capacity.
Met-Chem manufactures Filter Cloths for all makes and models of filter presses. Met-Chem offers a wide variety of sizes, materials, and weaves for your filter press. Our in-house sewing department can manufacturer any filter cloth to fit any filter press. All our filter cloths are made in the USA at our Cleveland, Ohio facility.
Non-Gasketed Cloths come lined with a latex coating along the outer edge to ensure a tight seal.
Met-Chem understands the time constraints put onto manufacturing facilities and there is often not enough time in the day or enough manpower available to perform maintenance such as Replacing the Filter Press Cloths in your filter press. If you do not have the time or manpower to change your filter press cloths, there are several options available to help with this issue
First, a set of plates, as small as 2, can be purchased from Met-Chem. This will allow you to swap out old plates with these new plates 2 at a time. This will allow you to take your time to change these two cloths. Once these two are done they can be swapped out for the next two that need done. This is performed until all the plates have been reclothed.
A second option is to send the filter press plates to Met-Chem to have them professionally changed be our Met-Chem Installation Team. The filter press plates will have their old cloths and gaskets removed. The plates will be given a thorough acid wash and then power washed. We will then install the new cloths and new gaskets. If you are able to have your filter press shutdown for a few days we can quickly perform the work on your plates and get them back ASAP. If you are not able to be down for a few days then we can provide you with either a full set of new plates or a partial set of filter press plates. As with option one, we will provide new plates with cloths and gaskets in the quantity that works for your timeline and budget. Once the new plates are installed in your filter press you will send your old plates to Met-Chem and we will perform the work on your current plates and send back once completed.
Whatever your needs are regarding filter presses Met-Chem has an option that can help. Please Contact Our Sales Team for assistance
Met-Chem, Inc.
837 East 79th St.
Cleveland, OH 44103
Phone: (216) 881-7900
Email: info@metchem.com
A Senney Enterprise Company
Copyright © Met-Chem, Inc
